Tripp Lite SMART5000XFMRXL 5000VA UPS


DiscTech Item #: TRI-SMART5000XFMRXL-BN-2Y

  • Special Order - Ships in 3-5 business days
    Special Order - Ships in 3-5 business days

    This item has a lead time for fulfilment (as listed), this is approximate. Your credit card will be authorized in full on the day of ordering; it will not be charged until the day of shipment.


Interface Types: Serial RS-232 DB9

U Height: 3U

Voltage: 208V

Color: Silver

Tripp Lite SmartPro SMART5000XFMRXL 208V & 120V 5000VA / 3750W Line Interactive Sine Wave UPS 3U Rack Tower - Brand New

Tripp Lite SmartPro SMART5000XFMRXL 208V & 120V 5000VA / 5kVA 3750W / 3.75kW USB / DB9 11 Outlet Line Interactive Sine Wave Uninterruptible Power Supply 3U Rack Tower Extended Run - Brand New

Tripp Lite 5kVA Smart RM UPS. 5000VA line-interactive UPS for server, network and telecommunications equipment. UPS with internal batteries requires 3 rack spaces installed. Accepts 208V nominal input voltage. Simultaneous 208 & 120V output. Corrects brownouts and overvoltages from 167V to 260V. Sine wave output. Maintains battery-derived AC output during blackouts and severe voltage fluctuations. Expandable runtime with optional external battery packs. 11 output receptacles. NEMA L6-30P input connection with support for user-supplied 50A or hardwire input. Network-grade AC surge and noise suppression. Network management interfaces include USB, DB9 serial and slot for Network Management Card options. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all network interfaces simultaneously. PowerAlert UPS monitoring software is available via free download. Emergency Power Off (EPO) interface. Integrated 8-bank switched PDU. 3-stage metered current monitoring and battery charge LEDs. Utility power and voltage regulation LEDs. Audible alarm. Self-test. 4-post rack mounting accessories included; 2-9USTAND and 2POSTRMKITHD accessories available. Field-replaceable, hot-swappable internal batteries and battery packs.


  • 5000VA/3750 watt max. output power capacity compatible with North American 208V/60Hz input voltage
  • Supports full output at either 208V or 120V
  • 3U rack/tower UPS installs in standard 19 inch rack enclosures with an installed depth of only 25 inches / 63.5cm
  • Protects sensitive networking equipment from blackouts, voltage fluctuations and transient surges
  • Line Interactive Automatic Voltage Regulation (AVR) corrects 208V nominal input from 167 to 260VAC back to usable 208/120V levels without consuming battery power
  • AVR circuits boost undervoltages by 12% and reduce overvoltages by 12%
  • Network interfaces support simultaneous communications via USB, DB9 serial and slot for Network Management Card option
  • Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLXand SNMPWEBCARD
  • USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from
  • Built-in Emergency Power Off (EPO) interface with cable
  • Sine wave output in AC and battery mode
  • Expandable runtime with optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible) external battery packs
  • NOTE: BP48V24-2U must either be (1) installed in a recessed position inside the rack so the DC cable can reach the BP connector on the UPS or (2) be installed in a standard front-mount position with a 1 foot 48VDC extension cable BPEXT481
  • Half/full load runtime of 20/8.5 minutes with internal batteries
  • Intelligent battery management system extends battery life
  • Includes 11 output receptacles (2 L6-20, 1 L6-30 & 8 NEMA 5-15/20R)
  • Ships with installed L6-30P input plug, supports user supplied 50A replacement plug or hardwire input
  • Integrated 8 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual devices
  • 3 stage metered LEDs offer current monitoring and battery charge level
  • Mains power and voltage regulation LEDs offer at-a-glance power status information
  • Front panel switches support self-test and alarm cancel functions
  • Included adjustable mounting rails support installation in 4 post 19 inch racks
  • UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user is required
  • Supports upright tower placement with optional 2-9USTAND accessory

Package Includes

  • SMART 5000XFMRXL UPS System
  • USB & DB9 Serial Cabling
  • Mounting hardware for 4-post rackmount installation
  • Instruction manual

Model NumberSMART5000XFMRXL
Output Volt Amp Capacity (VA)5000
Output kVA Capacity (kVA)5
Output Watt Capacity (Watts)3750
Output kW Capacity (kW)3.75
Power Factor0.75
Nominal Output Voltage(s) Supported110V
Nominal Voltage Details208/120V nominal output in battery mode
Frequency Compatibility60 Hz
Output Voltage Regulation (Line Mode)208 & 120V (+/- 10%)
Output Voltage Regulation (Battery Mode)+/- 5%
Output Receptacles(8) 5-15R/20R
(2) LG-20R
(1) L6-30R
Load Management ReceptaclesEight switchable single-outlet 5-15/20R load banks
Output Circuit Breakers120A double pole breaker supports L6-20R outlets, 20A branch rated breaker (x2) supports 4 5-15/20R outlets each, L6-30R outlet is unbreakered
Output AC Waveform (AC Mode)Sine wave
Output AC Waveform (Battery Mode)Pure Sine wave
Rated input current (Maximum Load)24A
Nominal Input Voltage(s) Supported208V AC
UPS Input COnnection TypeL6-30P
UPS Imput Cord Length (ft.)10
Recommended Electrical Service30A 208V
Input PhaseSingle-Phase
Full Load Runtime (min.)8.5 min. (3750w)
Half Load Runtime (min.)20 min. (1875w)
Expandable Battery RuntimeExtended runtime supported via optional external battery packs
External Battery Pack CompatibilityBP48V24-2U(limit 1)
BP48V60RT-3U(multi-pack compatible)
BP48V27-2US(multi-pack compatible)
DC System Voltage (VDC)48
Battery Recharge Rate (Included Batteries)Less than 4 hours from 10% to 90% (typical, full load discharge)
Internal UPS Replacement Battery CartridgeRBC94-3U(quantity 3)
Battery AccessFront panel battery access door
Battery Replacement DescriptionHot-swappable, user replaceable batteries
Expandable RuntimeYes
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 167 to 260
Overvoltage CorrectionInput voltages between 228 and 260 are reduced by 12%
Undervoltage CorrectionInput voltages between 167 and 194 are boosted by 12%
Switches2 Switches control off/on power status and alarm-cancel/self-test operation
Alarm Cancel OperationPower-fail alarm can be silenced using alarm-cancel switch
nce silenced, alarm will re-sound to indicate low-battery status
Audible AlarmAudible alarm indicates UPS startup, power-failure, low-battery conditions
LED Indicators5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
UPS AC Suppression Joule Rating1020
UPS AC Suppression Response TimeInstantaneous
EMI / RFI AC Noise SuppressionYes
Included Mounting Accessory Description4 post 19 inch rackmount
Installation Form Factors Supported with Optional Accessories2 post rackmount(2POSTRMKITHD)
Primary Form FactorRackmount
UPS Power Module Dimensions (hwd, in.)5.2 x 17.5 x 25
Rack Height (U Spaces)3
Minimum Required Rack Depth (inches)32
UPS Power Module Weight (lbs/kg)143.3/65.00
Cooling MethodFan
UPS Housing MaterialSteel
Minimum Required Rack Depth (mm)813
Primary UPS Height (mm)132
Primary UPS Width (mm)444
Primary UPS Depth (mm)635
Operating Temperature Range+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius.
Storage Temperature Range+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius.
Relative Humidity0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load)366
Battery Mode BTU / Hr. (Full Load)1423
AC Mode Efficiency Rating (100% Load)97%
Communications InterfaceUSB
DB9 Serial
EPO (emergency power off)
Slot for SNMP/Web interface
Network Management CardsSNMPWEBCARD
Network Monitoring Port DescriptionSupports detailed monitoring of UPS and site power conditions
PowerAlert SoftwareFor local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at
Communications CableUSB and DB9 cabling included
WatchDog CompatibilitySupports Watchdog application, OS and hard-reboot restart options for remote applications
Transfer Time7 ms (AC to Battery); 1 ms (Battery to AC) typical
Low Voltage Transfer to Battery Power (Setpoint)167
High Voltage Transfer to Battery Power (Setpoint)260
Grounding LugBack panel grounding lug
Cold Start (Startup in Battery Mode During a Power Failure)Cold-start operation supported
High Availability UPS FeaturesHot swappable batteries
Green Energy-Saving FeaturesGreater than 95% efficiency - GREEN UPS; Individually controllable load banks
UPS CertificationsTested to UL1778 (USA)
Tested to CSA (Canada)
Tested to NOM (Mexico)
Meets FCC Part 15 Category A (EMI)

Click here to view the manufacturer's item description/brochure

ROHS Compliant

Weight: 59 lb

Warranty: 2 Year Manufacturer

Brand New

Condition Levels Explained

The product is brand new.

2 Year Manufacturer Warranty

Product Warranties Explained

The product has a manufacturer warranty for the time period specified.