SCSI ID Jumper Block Settings
You will need to locate the SCSI ID pins on the device. They are normally identifed as A0, A1, A2, A3 or SCSI 0, SCSI 1, SCSI 2, SCSI 3. These indicate the SCSI Pin Pairs to use when setting the SCSI IDs. These pin pairs will need to be jumped vertically in order to set the ID desired. This will require up to four SCSI jumpers.
If you do not have SCSI ID jumpers, you can purchase them at the following page:
Mini Jumpers for Hard Drives, CD/DVD ROM drives and Motherboards
SCSI ID | Pin Pairs Covered | SCSI ID | Pin Pairs Covered |
---|---|---|---|
0 | None (Default) | 8 | 7-8 |
1 | 1-2 | 9 | 1-2 and 7-8 |
2 | 3-4 | 10 | 3-4 and 7-8 |
3 | 1-2 and 3-4 | 11 | 1-2, 3-4, and 7-8 |
4 | 5-6 | 12 | 5-6 and 7-8 |
5 | 1-2 and 5-6 | 13 | 1-2, 5-6, and 7-8 |
6 | 3-4 and 5-6 | 14 | 3-4, 5-6, and 7-8 |
7 | 1-2, 3-4, and 5-6 | 15 | 1-2, 3-4, 5-6, and 7-8 |