Dell 770D8 / D162J Powervault MD3200i and MD3220i iSCSI four (4) port controller Module

Dell Part #/MPN: 770D8

DiscTech Item #: DEL-770D8-NP-OE

$799.00
  • New Pull
    Condition Levels Explained

    The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.

  • Warranty:1 Year DiscTech
    Product Warranties Explained

    The product has a DiscTech warranty for the time period specified. View our limited warranty

  • Low Stock:Call for ETA
    Stock Levels

    This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.

Back
$799.00

Interface Types: SAS Serial Attached SCSI, Ethernet RJ45, PS2, SFF-8087, SFF-8088

Form Factor: 3.5inx1.0in LFF Hard Drive

Encryption/SED Supported

Electrical Interface: Ethernet Gigabit - 1Gbps

On-Board Cache: 2GB

Bays/Ports/Slots: 4

Wattage/VA: 600W

Voltage: 110-240V Multi

Dell 770D8 / D162J Powervault MD3200i and MD3220i iSCSI four (4) port EMM RAID controller Module - New Pull

Dell 770D8 / D162J Powervault MD3200i and MD3220i iSCSI four (4) port EMM RAID controller Module - New Pull

Each MD3200i or MD3220i will accept two of these controller modules.

Alternate Part Numbers: D162J 0D162J 0770D8

Compatibility: Dell MD3200i
Dell MD3220i

The Dell MD3200i and MD3220i storage enclosure contains two EMM RAID controller modules. Both are hot-pluggable and can be removed and installed independently without shutting down the enclosure.

This is a Dell original controller module with x1 SAS OUT, x1 Ethernet MGMT Port, and 4x iSCSI ports.

Supports Dell original SAS/SATA hard drives.

ROHS Compliant

Alternate MPNs: D162J 0D162J 0770D8

Weight: 6 lb

Warranty: 1 Year DiscTech

New Pull

Condition Levels Explained

The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.

1 Year DiscTech Warranty

Product Warranties Explained

The product has a DiscTech warranty for the time period specified. View our limited warranty