Micron M500 MTFDDAK960MAV-1AE12ABYY / MK31D 1TB (960GB) SATA SSD

Micron Part #/MPN: MTFDDAK960MAV-1AE12ABYY


  • Low Stock:Call for ETA
    Stock Levels

    This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.


Capacity: 960GB

Speed: Solid State Memory

Interface Types: SATA

Form Factor: 2.5inx7mm Fits All laptops

Encryption/SED Supported

Sector Size: 512 / 512e

Average Seek Time: 5ms / 25ms (MAX)

Electrical Interface: SATA 600 - 6.0Gbps

On-Board Cache: 128GB


SSD Endurance DWPD: Consumer / Value

Micron M500 MTFDDAK960MAV-1AE12ABYY / MK31D 1TB (960GB) 6Gbps 2.5in Mixed-Use MLC SED SATA SSD - New Pull 

Micron M500 MTFDDAK960MAV-1AE12ABYY 1TB (960GB) 6.0Gbps 2.5in x 7mm Multi Level Cell SED SATA SSD - New Pull

Alt DPNs: MK31D, 0MK31D

Micron’s solid state drive (SSD) uses a single-chip controller with a SATA interface on the system side and 8-channels of Micron NAND Flash internally. Packaged in an HDD replacement enclosure, the SSD integrates easily in existing storage infrastructures.

The SSD is designed to use the SATA interface efficiently during both READs and WRITEs while delivering bandwidth-focused performance. SSD technology enables enhanced boot times, faster application load times, reduced power consumption, and extended reliability.

The self-encypting drive (SED) features a FIPS-compliant, AES-256 encryption engine, providing hardware-based, secure data encryption, with no loss of SSD performance. This SED follows the TCG/Opal specification for trusted peripherals.


This drive is compatible with Servers, PC's and Laptops that accept 2.5"x7mm SATA drives.

Micron M500 SSD
Interface6Gb/s SATA
Capacity1TB / 960GB
FlashMLC NAND Flash
EncryptionTCG/Opal 2.0-Complient Self-Encrypting drive
Sector Size512
Sequential 128KB ReadUp to 500MB/s
Sequential 128KB WriteUp to 400MB/s
Random 4KB ReadUp to 80,000 IOPS
Random 4KB WriteUp to 80,000 IOPS
Read/Write Latency5ms / 25ms (MAX)
Power Consumption150MW (Typical)
Form Factor2.5" x7mm
Reliability/Data Integrity
Mean Time Between Failures (MTBF, hours)1,200,000
Total bytes written (TBW)up to 500TB
Nonrecoverable Read Errors per Bits Read1 Sector per 1015
Operating Temperature0°C - 70°C

Click here to view the manufacturer's item description/brochure

ROHS Compliant

Alternate MPNs: MK31D 0MK31D

Weight: 0.5 lb

Warranty: 1 Year DiscTech

New Pull

Condition Levels Explained

The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.

1 Year DiscTech Warranty

Product Warranties Explained

The product has a DiscTech warranty for the time period specified. View our limited warranty