Promise Technology VTJ610SS JBOD Expansion Chassis


DiscTech Item #: PRO-VTJ610SS-BN-3Y

  • Low Stock:Call for ETA
    Stock Levels

    This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.


Enterprise Grade

Interface Types: SAS Serial Attached SCSI, SATA, SFF-8088

Form Factor: 3.5inx1.0in LFF Hard Drive

Electrical Interface: SAS-1 Serial Attached SCSI - 3.0Gbps

Bays/Ports/Slots: 16

U Height: 3U

Wattage/VA: 400W

Voltage: 110-240V Multi

Promise Technology VTrak VTJ610SS J610s Series 3U 16 Bay SAS JBOD DAS Expansion Chassis Storage Array - Brand New

Promise Technology VTrak VTJ610SS J610s Series 3U 16 Bay SAS Single-Controller JBOD DAS Expansion Chassis Storage Array - Brand New


  • JBOD storage enclosure with Single I/O module and two SAS-wide Ports
  • 16 hot-swappable drive bays in a robust 3U chassis
  • Supports Serial Attached SCSI (SAS) and SATA drives simultaneously
  • Redundant, hot-swappable Field Replaceable Units (FRUs)
  • SES-2 compliant enclosure management
  • Compatible with leading SAS & SATA drives, HBAs and RAID controller

  • Compatibility:

    This product supports any mix of SAS and SATA drives simultaneously in the same enclosure.

I/OSingle I/O supports failover/failback and active/ active drive access
Drives IncludedNo drives included
Drive SupportUp to sixteen 3.5” x 1” hard drives SAS 3Gb/s, SATA II 3Gb/s and 1.5Gb/s
Supports any mix of SAS and SATA drives simultaneously in the same enclosure
External I/O Ports (per controller)Each I/O module has two SAS ports using industry standard Mini SAS 4x wide-port-SAS connectors (SFF-8088), one IN and one OUT for cascading JBODs
Management Function– With Expander EmbeddedSMP – SAS Management Protocol In-band access to Expander and PHY information Statistic counters and performance monitors SES EM – SES
Enclosure Management (ANSI T10 SES 2 Compliant) SCSI SES command set over virtual SSP device
Supported Operating SystemsWindows 2003, Linux (Red Hat, SuSE)
Management Tools/InterfaceLED status indicator support for drives, FRU and enclosure environmentals In-band SES enclosure management alerts user to out of spec operation: thermal condition, voltage condition or component failures, protecting data and hardware
Full subsystem management CLI through out-of-band RS232 serial port
Enclosure Management ProtocolsSES over in-band SAS
Voltage100-240 Vac Auto-Ranging
Current (Maximum)8 A @ 100 Vac; 4 A @ 240 Vac (current rating with two power cords)
Power SupplyDual 500W, 100-240 Vac auto-ranging, 50-60 Hz, dual hot swap and redundant with PFC, N+1 design
Power Consumption108.38 Watts (under load w/o HDD), 523.91 Watts (under load with SAS HDD)
Operating Temperature/ Humidity5°~40°C (-40°~60°C non operational) / Maximum 95%
VibrationRandom, 0.21 grms, 5-500Hz, X, Y, Z axis
Dimensions13.1x 44.65x 56.1 cm (5.2 x 17.6 x 22.1in)
WeightNet weight: 30.5 kg (67.2 lbs) without drives, 38.5 kg (84.9 lbs) with 16 drives
Gross weight: 37.5kg (82.7 lbs) without drives
SafetyCE, FCC ClassA, VCCI, cUL, TUV, CB, BSMI, C-Tick, MIC

Click here to view the manufacturer's item description/brochure

Weight: 83 lb

Warranty: 3 Year Manufacturer

Brand New

Condition Levels Explained

The product is brand new.

3 Year Manufacturer Warranty

Product Warranties Explained

The product has a manufacturer warranty for the time period specified.