SAMSUNG Part #/MPN: HD083GJ
DiscTech Item #: SAM-HD083GJ-NP-OE
- New PullCondition Levels Explained
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
- Warranty:1 Year DiscTechProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Capacity: 80GB
Speed: 7,200RPM
Interface Types: SATA
Form Factor: 3.5inx1.0in LFF Hard Drive
Sector Size: 512 / 512e
Average Seek Time: 9.3ms
Electrical Interface: SATA 300 - 3.0Gbps
On-Board Cache: 8MB
Samsung Spinpoint H.D.D. Series HD083GJ 80GB 7.2K 8MB SATA 3.5" Hard Drive - New Pull
HD-HD083GJ SAMSUNG® Spinpoint H.D.D Series - 80GB Desktop Serial ATA II hard drive.
Samsung Spinpoint H.D.D. Series HD083GJ 80GB 7.2K 8MB SATA 3.5" Hard Drive - New Pull
Formatted Capacity : 80.0 GB
Native Serial ATA II (3.0Gbps) with Native Command Queuing (NCQ)
Fluid Dynamic Bearing Spindle Motor Technology
High Speed Dual Digital Signal Processor (DSP) Based Architecture
ATA SMART Compliant
ATA Security Mode Feature Set
ATA Host Protected Area Feature Set
ATA Automatic Acoustic Management Feature Set
ATA 48-bit Address Feature Set
ATA Streaming Feature Set
ATA Power Up In Standby Feature Set
ATA Device Configuration Overlay Feature Set
Permuted RLL/ECC On-The-Fly Error Correction
RoHS-compliant
NoiseGuard™
SilentSeek™
Hot-Plug & Hot-Swap capable
Click here to view the manufacturer's item description/brochure
Weight: 1.8 lb
Warranty: 1 Year DiscTech
New Pull
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty