Samsung Spinpoint S166 HD161HJ 160GB 7.2K SATA-300 Hard Drive

SAMSUNG Part #/MPN: HD161HJ

DiscTech Item #: SAM-HD161HJ-NP-OE


$65.00
  • Low Stock:Call for ETA
    Stock Levels

    This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.

$65.00

Capacity: 160GB

Speed: 7,200RPM

Interface Types: SATA

Form Factor: 3.5inx1.0in LFF Hard Drive

Sector Size: 512 / 512e

Sustained Throughput: 61

Electrical Interface: SATA 300 - 3.0Gbps

On-Board Cache: 16MB

Samsung SpinPoint S166 HD161HJ 160GB 7.2K SATA-300 3.5" Hard Drive - New Pull

- Up to 160Gb formatted capacity
- Serial ATA 3.0 Gpbs interface support
- SATA native command queuing feature
- device intitiated STAT power management
- staggered spin-up support
- high speed dual DSP based architecture
- ATA S.M.A.R.T. compliant
- ATA automatic acoustic managment feature
- ATA 48-bit address feature
- ATA streaming feature (optional)
- ATA device configuration overlay feature
- ImpacGuard™
- SilentSeek™


Compatibility:

This drive is compatible with any of our SATA hot swap trays and controllers.

Drive Configurations

  • Capacity  
    • 160 GB 
  • Interface 
    • SATA 3.0Gbps 
  • Buffer DRAM Size 
    • 8 MB 
  • Byte per Sector 
    • 512 bytes 
  • Rotational Speed 
    • 7,200 RPM 

Performance Specifications

  • Average Seek time(typical) 
    • 8.9 ms 
  • Data Transfer Rate / Media to/from Buffer (Max.) 
    • 175 MB/sec 
  • Data Transfer Rate / Buffer to/from Host (Max.) 
    • 300 MB/sec 
  • Average Latency 
    • 4.17 ms 
  • Drive Ready Time(typical) 
    • 8 sec 

Reliability Specifications

  • Non-recoverable Read Error 
    • 1 sector in 10^15 bits 

Acoustics

  • Idle 
    • 2.45 Bel 
  • Performance Seek 
    • 2.80 Bel 

Environmental Specifications

  • Temperature / Operating 
    • 0 ~ 60 °C 
  • Temperature / Non-operating 
    • -40 ~ 70 °C 
  • Humidity (non-condensing) / Operating 
    • 5 ~ 90 % 
  • Humidity (non-condensing) / Non-operating 
    • 5 ~ 95 % 
  • Liner Shock (1/2 sine pulse) / Operating 
    • 70 G 
  • Liner Shock (1/2 sine pulse) / Non-operating 
    • 350 G 
  • Altitude (relative to sea level) / Operating 
    • -300 to 3,000 m 
  • Altitude (relative to sea level) / Non-operating 
    • -300 to 12,000 m 

Power Requirements

  • Voltage 
    • +5V±5%, +12V±10% 
  • Spin-up Current (Max.) 
    • 2.0 A 
  • Seek (typical) 
    • 5.7W 
  • Read/Write (typical) 
    • 6.1W 
  • Idle (typical) 
    • 4.4W 
  • Standby (typical) 
    • 0.7/1W 
  • Sleep (typical) 
    • 0.7/1W 

Physical Dimension

  • Height (Max.) 
    • 26.1 mm 
  • Width 
    • 101.5 mm 
  • Length 
    • 147.0 mm 
  • Weight (avg.) 
    • 470 g

Click here to view the manufacturer's item description/brochure

Alternate MPNs: HD161HJ/D

Weight: 1.8 lb

Warranty: 1 Year DiscTech

New Pull

Condition Levels Explained

The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.

1 Year DiscTech Warranty

Product Warranties Explained

The product has a DiscTech warranty for the time period specified. View our limited warranty