Seagate Part #/MPN: ST3400832A
DiscTech Item #: SGT-ST3400832A-NP-OE
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Interface Types: IDE ATA 3.5in
Form Factor: 3.5inx1.0in LFF Hard Drive
Sector Size: 512 / 512e
Sustained Throughput: 65
Average Seek Time: 8 / 9
Electrical Interface: EIDE Ultra ATA100 100MBps
On-Board Cache: 8MB
Seagate Barracuda 7200.8 400GB 7.2K IDE ATA/100 Hard Drive ST3400832A - New Pull
Seagate Barracuda 7200.8 drives provide high-performance, highly- reliable storage for PCs and advanced applications, backed up by an industry-leading five-year warranty. Their best-in-class combination of capacity, performance, and support ideally suit them for such applications as high-performance PCs, media PCs, PATA-based servers and RAIDs, and cost-effective network attached storage (NAS).
Whisper-quiet acoustics and high reliability in a high-performance environment.
Significantly reduced levels of lead complies with all environmental legislation.
High nonoperating shock specification ensures top reliability and durability during shipment and integration.
Formatted Gbytes (512 bytes/sector)*
Bytes per sector
Default sectors per track
Default read/write heads
Recording density in BPI (bits/inch max)
Track density TPI (tracks/inch avg)
Areal density (Mbits/inch2 avg)
Spindle speed (RPM)
Internal data transfer rate (Mbytes/sec max)
Sustained transfer rate OD (Mbytes/sec)
I/O data transfer rate (Mbytes/sec max)
ATA data-transfer modes supported
PIO modes 0–4Multiword DMA modes 0–2Ultra DMA modes 0–5
26.11 mm (1.028 inches)
101.85 mm (4.010 inches)
146.99 mm (5.787 inches)
Weight (max) grams / lb.
635 / 1.39
Average latency (msec)
Power-on to ready (typical)
Standby to ready (typical)
Track-to-track seek time (msec typical)
0.8 (read), 1.0 (write)
Average seek, read (msec typical)
Average seek, write (msec typical)
Startup current (typical) 12V (peak)
Seek power (typical) watts
Operating power (typical) watts
Idle mode (typical) watts
Standby mode (typical) watts
5V ± 5%
12V ± 10%
0° to 60°C (op.)
–40° to 70°C (nonop.)
Click here to view the manufacturer's item description/brochure
Weight: 1.8 lb
Warranty: 1 Year DiscTech
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty