Seagate Barracuda 7200.7 ST340014AS SATA Hard Drive

Seagate Part #/MPN: ST340014AS

DiscTech Item #: SGT-ST340014AS-NP-OE

$55.00
  • New Pull
    Condition Levels Explained

    The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.

  • Warranty:1 Year DiscTech
    Product Warranties Explained

    The product has a DiscTech warranty for the time period specified. View our limited warranty

  • Low Stock:Call for ETA
    Stock Levels

    This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.

Back
$55.00

Capacity: 40GB

Speed: 7,200RPM

Interface Types: SATA

Form Factor: 3.5inx1.0in LFF Hard Drive

Sector Size: 512 / 512e

Average Seek Time: 8.5

Electrical Interface: SATA 150 - 1.50Gbps

On-Board Cache: 2MB

Seagate Barracuda 7200.7 ST340014AS 40GB 7.2K SATA 3.5" Hard Drive -  New Pull

• 7,200-RPM spindle speed

• 2-Mbyte buffer

• High instantaneous (burst) data transfer rates (up to 100 Mbytes per second) using Ultra DMA mode 5.

• Giant magnetoresistive (GMR) recording heads and EPRML technology, which provide the drives with

increased areal density.

• State-of-the-art cache and on-the-fly error-correction algorithms.

• Full-track multiple-sector transfer capability without local processor intervention.

• Quiet operation.

• 350 Gs nonoperating shock.

• SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns.

• The 3D Defense System™, which includes Drive Defense, Data Defense, and Diagnostic Defense, offers

the industry’s most comprehensive protection for disc drives.

• Support for S.M.A.R.T. drive monitoring and reporting.

• Support for Read Multiple and Write Multiple commands.

• Support for autodetection of master/slave drives that use cable select (CSEL).

Drive specification

ST340014AS

Formatted Gbytes (512 bytes/sector)*

40

Bytes per sector

512

Spindle speed (RPM)

7,200

ATA data-transfer modes supported

PIO modes 0–4Multiword DMA modes 0–2Ultra DMA modes 0–5

Cache buffer

 

2 Mbytes

Height (max)

26.11 mm (1.028 inches)

Width (max)

101.85 mm (4.010 inches)

Length (max)

146.99 mm (5.787 inches)

Weight (max) grams / lb.

635 / 1.39

Average latency (msec)

4.16

Power-on to ready (typical)

10 sec

Standby to ready (typical)

10 sec

 

Average seek (msec typical)

<8.5

Ambient temperature

0° to 60°C (op.)

–40° to 70°C (nonop.)

Click here to view the manufacturer's item description/brochure

Weight: 1.8 lb

Warranty: 1 Year DiscTech

New Pull

Condition Levels Explained

The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.

1 Year DiscTech Warranty

Product Warranties Explained

The product has a DiscTech warranty for the time period specified. View our limited warranty