Seagate Part #/MPN: ST3500630A
DiscTech Item #: SGT-ST3500630A-FR-6M
- Factory RefurbishedCondition Levels Explained
The product has been built, rebuilt or repaired at the original manufacturer's factory (Note we NEVER sell 3rd party repaired items, as we do not find them to be reliable enough). Often these products are extremely close to new in condition, except that they contain at least one recycled or repaired component. Failure rates are often lower on these devices since they have been far more thoroughly tested than new items.
Product Warranties ExplainedThe product has a manufacturer warranty for the time period specified.
- Warranty:6 Month Manufacturer
- Special Order - Ships in 5-10 business daysSpecial Order - Ships in 5-10 business days
This item has a lead time for fulfilment (as listed), this is approximate. Your credit card will be authorized in full on the day of ordering; it will not be charged until the day of shipment.
Capacity: 500GB
Speed: 7,200RPM
Interface Types: IDE ATA 3.5in
Form Factor: 3.5inx1.0in LFF Hard Drive
Sector Size: 512 / 512e
Sustained Throughput: 72
Average Seek Time: 11 / 12
Electrical Interface: EIDE Ultra ATA100 100MBps
On-Board Cache: 16MB
Seagate Barracuda ST3500630A 7200.10 500GB 7.2K IDE ATA/100 Hard Drive - Factory Recertified
The Seagate Barracuda 7200.10 desktop hard drive features innovative perpendicular recording technology and is the first drive on the market to provide capacities up to 750 GB. Barracuda 7200.10 hard drives deliver superb performance, efficiency, speed and durability for all your application needs.
- Perpendicular recording technology for maximum drive capacity and reliability
- 16-MB cache buffer
- Ultra-fast performance
- Superb reliability
- Whisper-quiet operation
- Enhanced G-Force Protection against handling damage
| Drive specification | ST3500630A | |
| Formatted Gbytes (512 bytes/sector)* | 500 | |
| Guaranteed sectors | 976,773,168 | |
| Bytes per sector | 512 | |
| Default sectors per track | 63 | |
| Default read/write heads | 16 | |
| Default cylinders | 16,383 | |
| Recording density in BPI (bits/inch max) | 813,000 | |
| Track density TPI (tracks/inch avg) | 145,000 | |
| Areal density (Mbits/inch2 avg) | 114,400 | |
| Spindle speed (RPM) | 7,200 | |
| Internal data transfer rate (Mbytes/sec max) | 1,030 | |
| Sustained transfer rate OD (Mbytes/sec) | 72 | |
| I/O data transfer rate (Mbytes/sec max) | 100 | |
| ATA data-transfer modes supported | PIO modes 0–4Multiword DMA modes 0–2Ultra DMA modes 0–5 | |
| Cache buffer | 16 Mbytes | |
| Height (max) | 26.11 mm (1.028 inches) | |
| Width (max) | 101.85 mm (4.010 inches) | |
| Length (max) | 146.99 mm (5.787 inches) | |
| Weight (max) grams / lb. | 635 / 1.39 | |
| Average latency (msec) | 4.16 | |
| Power-on to ready (typical) | 15 sec | |
| Standby to ready (typical) | 15 sec | |
| Track-to-track seek time (msec typical) | 0.8 (read), 1.0 (write) | |
| Average seek, read (msec typical) | 11.0 | |
| Average seek, write (msec typical) | 12.0 | |
| Startup current (typical) 12V (peak) | 2.8 amps | |
| Seek power (typical) watts | 9.9 | |
| Operating power (typical) watts | 9.2 | |
| Idle mode (typical) watts | 7.2 | |
| Standby mode (typical) watts | 1.2 | |
| Sleep mode | 1.2 | |
| Voltage tolerance (including noise) | 5V ± 5% 12V ± 10% | |
| Ambient temperature | 0° to 60°C (op.) –40° to 70°C (nonop.) | |
Click here to view the manufacturer's item description/brochure
Weight: 1.8 lb
Warranty: 6 Month Manufacturer
Factory Refurbished
The product has been built, rebuilt or repaired at the original manufacturer's factory (Note we NEVER sell 3rd party repaired items, as we do not find them to be reliable enough). Often these products are extremely close to new in condition, except that they contain at least one recycled or repaired component. Failure rates are often lower on these devices since they have been far more thoroughly tested than new items.
The product has a manufacturer warranty for the time period specified.
6 Month Manufacturer Warranty