Seagate Part #/MPN: ST1800MM0018
DiscTech Item #: SGT-ST1800MM0018-NP-OE
- New PullCondition Levels Explained
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
- Warranty:1 Year DiscTechProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
- In Stock:1Need more?Stock Levels
This stock level is real time and accurate. This quantity is available for same-day shipment. Larger quantities can take up to a week to ship. Call us for larger quantities that you need urgently.
Enterprise Grade
Capacity: 1.8TB
Speed: 10K RPM
Interface Types: SAS
Form Factor: 2.5" SFF Server Drive
Sector Size: 512 / 512e
Sustained Throughput: 241 to 117
Average Seek Time: 2.9
Electrical Interface: SAS-3 12Gbps
On-Board Cache: 128MB
Hybrid SSD Cache: 32GB/MLC NAND
Seagate ST1800MM0018 1.8TB 2.5in 12Gbps 10K RPM eMLC Enterprise SAS HDD - New Pull
Seagate ST1800MM0018 1800GB 2.5" 12.0 Gbps 10,000 RPM eMLC Enterprise Serial Attached SCSI Hard Disk Drive - New Pull
Enterprise Performance 10K HDD
The Perfect Match of High Capacity and High Performance
- High-capacity and small 2.5-inch footprint enables data centers to keep pace with data growth and optimize data center real estate.
- Future-proof your storage solutions with advanced format interfaces 512 Emulation.
- Delivers 1800GB of high-performance data access for write-intensive applications
- Latest 12Gb/s SAS interface for improved scalability
- Over 2× legacy 3.5-inch 10K-RPM HDD capacity within a lower power envelope
- Seagate PowerChoice™ technology for T10-compliant power management enables IT organizations to tailor systems for enhanced power consumption.
- Seagate RAID Rebuild™ technology option makes RAID recovery faster and safer. • Protection Information (PI) protects against inadvertent data change.
- Delivers 1200GB of high-performance data access for write-intensive applications
Best-Fit Applications
- Mission-critical servers and external storage arrays
- Power- and space-constrained data centers
- Green IT and drive-retirement cost reduction initiatives
- Compliance or data security initiatives
- Migration from 3.5-inch drive systems to next-generation technology
Compatibility:
This drive is compatible with any server that accepts 2.5"x15mm (SFF) SAS drives.
| SPECIFICATIONS | |
|---|---|
| Standard Model | ST1800MM0018 |
| Capacity | 1.8TB/1800GB |
| PERFORMANCE | |
| Spindle Speed (RPM) | 10K |
| Average Latency (ms) | 2.9 |
| Sustained Transfer Rate (Outer to Inner Diameter, MB/s) | 241 to 117 |
| Cache, Multisegmented (MB) | 128 |
| CONFIGURATION/RELIABILITY | |
| Disks | 4 |
| Heads | 8 |
| Interface | 12Gb/s SAS |
| External Transfer Rate (MB/s) | 1200 |
| Nonrecoverable Read Errors per Bits Read | 1 per 10e16 |
| Annualized Failure Rate (AFR) | 0.44% |
| TURBOBOOST ENHANCED CACHE FEATURE | |
| I/O Acceleration and Response Time Optimization | Enabled |
| NAND Flash Type | eMLC |
| NAND Flash Size | 32GB |
| Intelligent NAND Endurance Management | Yes |
| POWER MANAGEMENT | |
| Typical Op (A) +5V/+12V | 0.44/0.47 |
| Typical Operation (W) | 7.25 |
| Power Idle (W) | 4.55 |
| Performance Efficiency Index (Idle W/GB) | 0.0025 |
| ENVIRONMENTAL | |
| Temperature, Operating (°C) | 5 to 55 |
| Temperature, Nonoperating (°C) | -40 to 70 |
| Shock, Operating: 11ms (Gs) | 40 |
| Shock, Nonoperating: 2ms (Gs) | 400 |
| Acoustics Idle (bels—sound power) | 3.1 |
| Vibration, Operating: <500Hz (Gs) | 0.5 |
| Vibration, Nonoperating: <500Hz (Gs) | 3 |
| PHYSICAL | |
| Height (in/mm, max) | 0.591/15.00 |
| Width (in/mm, max) | 2.760/70.10 |
| Depth (in/mm, max) | 3.955/100.45 |
| Weight (lb/kg) | 0.439/0.199 |
Click here to view the manufacturer's item description/brochure
Weight: 1.5 lb
Warranty: 1 Year DiscTech
New Pull
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty