Seagate Part #/MPN: ST3146707LW
DiscTech Item #: SGT-ST3146707LW-NP-OE
- New PullCondition Levels Explained
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
- Warranty:1 Year DiscTechProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Enterprise Grade
Capacity: 146GB
Speed: 10,000RPM
Interface Types: SCSI 68pin HD68
Form Factor: 3.5inx1.0in LFF Hard Drive
Sector Size: 512 / 512e
Sustained Throughput: 59 to 118
Average Seek Time: 4.7 / 5.3
Electrical Interface: SCSI LVD U320 - 320MBps 16-bit
On-Board Cache: 8MB
The Cheetah 10K.7 lowers cost of ownership with the industry'shighest reliability, designed for full duty cycle applications; Seagate-exclusive Background Media Scan; enhanced Error Correction Code; and low power and cooling requirements. Capacities include 300, 146 and 73 Gbytes, with Ultra320 SCSI or 2 Gbit/sec Fibre Channel interfaces. | |
Features | Benefits |
Highest Reliablity Rating | Reliability has a significant influence on a disc drive's total cost of ownership. Cheetah 10K.7 has an 0.62 percent AFR, the best in the industry. |
Full Duty Cycle Reliability | The Cheetah 10K.7 is designed to have the highest reliability, even when in used in demanding applications around the clock, 365 days per year. |
Background Media Scan | Background Media Scan, a Seagate-exclusive feature, scans the media during drive idle time to preserve system bandwidth while enabling incipient errors to be corrected before data is lost. |
Enhanced Error Correction Code | Decreased bit error rate better maintains performance throughout the life of the drive and results in a lower probability of lost data. |
Fluid Dynamic Bearing Motor | No ball bearings means reduced acoustics and improved reliability. |
Low Power and Cooling Requirements | Further reduces cost of ownership |
Distinctions | |
|
Drive specification | ST3146707LW | |
Formatted Gbytes (512 bytes/sector)* | 146 | |
Guaranteed sectors | 286,749,488 | |
Bytes per sector | 512 | |
Default sectors per track | 789 | |
Default read/write heads | 4 | |
Default cylinders | 90,774 | |
BPI | 658 | |
TPI | 105,000 | |
Areal density (Mbits/inch avg) | 128,200 | |
Spindle speed (RPM) | 10,000 | |
Internal data transfer rate (Mbytes/sec max) | 470 to 944 | |
Sustained transfer rate OD (Mbytes/sec) | 78 | |
I/O data transfer rate (Mbytes/sec max) | 100 | |
ATA data-transfer modes supported | PIO modes 0–4Multiword DMA modes 0–2Ultra DMA modes 0–5 | |
Cache buffer | 8 Mbytes | |
Height (max) | 25.4mm (1.000 in) | |
Width (max) | 101.6mm (4.000 in) | |
Length (max) | 146.05mm (5.75 in) | |
Weight (max) grams | 726 | |
Average latency (msec) | 3.0 | |
Power-on to ready (typical) | 15 sec | |
Standby to ready (typical) | 15 sec | |
Track-to-track seek time (msec typical) | 0.2 (read), 0.3 (write) | |
Average access read (msec typical) | 4.7 | |
Average access, write (msec typical) | 5.3 | |
Startup current (typical) 12V (peak) | 1.89 amps | |
Typical Current 12V (peak) | 0.42 amps | |
Startup current (typical) 5V (peak) | 076 amps | |
Typical Current 5V (peak) | 0.54 amps | |
|
| |
AFR | 0.62% | |
Voltage tolerance (including noise) | 5V ± 5% | |
Acoustics | 3.3 bels |
Capacity (Blocks) | ||||||
Sector Size | ST373207LC/LW | ST3146707LC/LW | ST3300007LC/LW | |||
Decimal | Hex | Decimal | Hex | Decimal | Hex | |
512 | 143,374,744 | 88BB998 | 286,749,488 | 11177330 | 585,937,500 | 22ECB25C |
514 | 141,025,384 | 867E068 | 282,050,768 | 10CFC0D0 | 574,712,644 | 22416B44 |
520 | 140,395,092 | 85E4254 | 280,790,184 | 10BC84A8 | 573,653,847 | 22314357 |
522 | 139,463,602 | 8500BB2 | 279,041,740 | 10A1D6CC | 570,053,000 | 21FA5188 |
524 | 137,577,184 | 83342E0 | 275,154,368 | 106685C0 | 566,007,800 | 21BC97F8 |
528 | Block Size Not Supported | 557,874,778 | 21407E5A |
Alternate MPNs: 9X2005-002
Weight: 1.8 lb
Warranty: 1 Year DiscTech
New Pull
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty