Western Digital WD2503ABYX RE4 SATA Hard Disk Drives

- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
- 1 Year DiscTechWarrantyProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
| Capacity: | 250GB |
| Speed: | 7.2K RPM |
| Interface Types: | SATA |
| Form Factor: | 3.5" LFF Hard Drive |
| Electrical Interface: | SATA 300 - 3Gbps |
| RAM: | 64MB |
Description
Western Digital RE4 WD2503ABYX 250GB 7.2K Enterprise 3.5" SATA Hard Drive - New Pull
WD RE4 Enterprise SATA Hard Drives | Dual processor |
RAFF™ | IntelliSeek™ |
Multi-axis shock sensor | RAID-specific, time-limited error recovery (TLER) |
NoTouch™ ramp load technology | Thermal extended burn-in test |
Third generation dynamic fly height | 24x7 reliability |
Compatibility
This drive is compatible with any SATA hot swap trays and controllers.
Specifications
| Specifications | |
| Model number | WD2503ABYX |
| Interface | SATA 3 Gb/s |
| Formatted capacity | 251 GB |
| User sectors per drive | 490,350,672 |
| Native command queuing | Yes |
| SATA latching connector | Yes |
| Form factor | 3.5-inch |
| Performance | |
| Max Data transfer rate | 3 Gb/s |
| Cache (MB) | 64 |
| Rotational speed (RPM | 7200 |
| Average drive ready time (sec) | 14 |
| Configuration/Organization | |
| Heads/disks | 1/1 |
| Bytes per sector (STD) | 512 |
| Reliability/Data Integrity | |
| Load/unload cycles | 600,000 |
| Non-recoverable read errors per bits read | <1 in 1015 |
| Limited warranty (years) | 5 |
| Power Management | |
| 12VDC (A, max) | 2.25 |
| Average required wats Read/Write | 6.4 |
| Average required wats Idle | 4.5 |
| Average required wats Standby | 0.8 |
| Average required wats Sleep | 0.8 |
| Environmental Specifications | |
| Operating Temperature (°C) | 5 to 55 |
| Non-operating Temperature (°C) | -40 to 70/td> |
| Shock (Gs) Operating (2 ms, read/write) | 30 |
| Shock (Gs) Operating (2 ms, read) | 65 |
| Shock (Gs) Non-operating (2 ms) | 350 |
| Average acoustics (dBA) Idle mode | 27- |
| Average acoustics (dBA) Performance seek mode | 30 |
| Average acoustics (dBA) Quiet seek mode | 29 |
| Physical Dimensions | |
| Height (in./mm, max) | 1.028/26.1 |
| Length (in./mm, max) | 5.787/147 |
| Width (in./mm, ± .01 in.) | 4/101.6 |
Click here to view the manufacturer's item description/brochure
Weight: 1.8 lb
Warranty: 1 Year DiscTech
Condition
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
Warranty
1 Year DiscTech Warranty




