Western Digital WD2503ABYX RE4 SATA Hard Disk Drives

- Special Order - Ships in 5-10 business daysSpecial Order - Ships in 5-10 business days
This item has a lead time for fulfilment (as listed), this is approximate. Your credit card will be authorized in full on the day of ordering; it will not be charged until the day of shipment.
- 1 Year ManufacturerWarrantyProduct Warranties Explained
The product has a manufacturer warranty for the time period specified.
| Capacity: | 250GB |
| Speed: | 7.2K RPM |
| Interface Types: | SATA |
| Form Factor: | 3.5" LFF Hard Drive |
| Electrical Interface: | SATA 300 - 3Gbps |
| RAM: | 64MB |
Description
Western Digital RE4 WD2503ABYX 250GB 7.2K Enterprise 3.5" SATA Hard Drive - Factory Refurbished
WD RE4 Enterprise SATA Hard Drives | Dual processor |
RAFF™ | IntelliSeek™ |
Multi-axis shock sensor | RAID-specific, time-limited error recovery (TLER) |
NoTouch™ ramp load technology | Thermal extended burn-in test |
Third generation dynamic fly height | 24x7 reliability |
Compatibility
This drive is compatible with any SATA hot swap trays and controllers.
Specifications
| Specifications | |
| Model number | WD2503ABYX |
| Interface | SATA 3 Gb/s |
| Formatted capacity | 251 GB |
| User sectors per drive | 490,350,672 |
| Native command queuing | Yes |
| SATA latching connector | Yes |
| Form factor | 3.5-inch |
| Performance | |
| Max Data transfer rate | 3 Gb/s |
| Cache (MB) | 64 |
| Rotational speed (RPM | 7200 |
| Average drive ready time (sec) | 14 |
| Configuration/Organization | |
| Heads/disks | 1/1 |
| Bytes per sector (STD) | 512 |
| Reliability/Data Integrity | |
| Load/unload cycles | 600,000 |
| Non-recoverable read errors per bits read | <1 in 1015 |
| Limited warranty (years) | 5 |
| Power Management | |
| 12VDC (A, max) | 2.25 |
| Average required wats Read/Write | 6.4 |
| Average required wats Idle | 4.5 |
| Average required wats Standby | 0.8 |
| Average required wats Sleep | 0.8 |
| Environmental Specifications | |
| Operating Temperature (°C) | 5 to 55 |
| Non-operating Temperature (°C) | -40 to 70/td> |
| Shock (Gs) Operating (2 ms, read/write) | 30 |
| Shock (Gs) Operating (2 ms, read) | 65 |
| Shock (Gs) Non-operating (2 ms) | 350 |
| Average acoustics (dBA) Idle mode | 27- |
| Average acoustics (dBA) Performance seek mode | 30 |
| Average acoustics (dBA) Quiet seek mode | 29 |
| Physical Dimensions | |
| Height (in./mm, max) | 1.028/26.1 |
| Length (in./mm, max) | 5.787/147 |
| Width (in./mm, ± .01 in.) | 4/101.6 |
Click here to view the manufacturer's item description/brochure
Weight: 1.8 lb
Warranty: 1 Year Manufacturer
Condition
The product has been built, rebuilt or repaired at the original manufacturer's factory (Note we NEVER sell 3rd party repaired items, as we do not find them to be reliable enough). Often these products are extremely close to new in condition, except that they contain at least one recycled or repaired component. Failure rates are often lower on these devices since they have been far more thoroughly tested than new items.
The product has a manufacturer warranty for the time period specified.
Warranty
1 Year Manufacturer Warranty




