SAMSUNG Part #/MPN: M393B2G70QH0-YK0
DiscTech Item #: SAM-M393B2G70QH0-YK0-NP-OE
- New PullCondition Levels Explained
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
- Warranty:1 Year DiscTechProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Interface Types: DDR3 DIMM 240pin
Form Factor: DDR3 RDIMM
Electrical Interface: PC3-12800
On-Board Cache: 16GB
Samsung M393B2G70QH0-YK0 16GB PC3-12800 DDR3l-1600MHz CL11 240-Pin RDIMM Certified ECC RAM Memory Module - New Pull
Samsung M393B2G70QH0-YK0 16GB PC3-12800 DDR3L-1600MHz CL11 240-Pin RDIMM Certified ECC / Error Correction Code RAM / Random Access Memory Memory Module - New Pull
- JEDEC standard 1.35V(1.28V~1.45V) & 1.5V(1.425V~1.575V) Power Supply
- VDDQ = 1.35V(1.28V~1.45V) & 1.5V(1.425V~1.575V)
- 400MHz fCK for 800Mb/sec/pin, 533MHz fCK for 1066Mb/sec/pin, 667MHz fCK for 1333Mb/sec/pin, 800MHz fCK for 1600Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 6,7,8,9,10,11
- Programmable Additive Latency(Posted CAS) : 0, CL - 2, or CL - 1 clock
- Programmable CAS Write Latency(CWL) = 5(DDR3-800), 6(DDR3-1066), 7(DDR3-1333) and 8(DDR3-1600)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either On the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower then TCASE 85C, 3.9us at 85C < TCASE 95C
- Asynchronous Reset
SAMSUNG | |
---|---|
Part Number | M393B2G70QH0-YK0 |
Density | 16GB |
Organization | 512Mx72 |
Height | 30mm |
tCK(min) | 1.25ns |
CAS Latency | 11nCK |
tRCD(min) | 13.75ns |
tRP(min) | 13.75ns |
tRAS(min) | 35 |
tRC(min) | 48.75 |
Click here to view the manufacturer's item description/brochure
ROHS Compliant
Weight: 0.5 lb
Warranty: 1 Year DiscTech
New Pull
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty