FUJITSU Part #/MPN: MHW2080BJ
DiscTech Item #: FUJ-MHW2080BJ-NP-OE
- New PullCondition Levels Explained
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
- Warranty:1 Year DiscTechProduct Warranties Explained
The product has a DiscTech warranty for the time period specified. View our limited warranty
- Low Stock:Call for ETAStock Levels
This item is currently (nearly) out of stock. It may be possible to arrange fast shipment. If you need it urgently call us. Otherwise, it usually ships within 1 week.
Capacity: 80GB
Speed: 7,200RPM
Interface Types: SATA
Form Factor: 2.5inx9mm Fits Most laptops
Sector Size: 512 / 512e
Average Seek Time: 10.5 / 12.5
Electrical Interface: SATA 300 - 3.0Gbps
On-Board Cache: 8MB
Fujitsu Mobile MHW2080BJ 80GB 7.2K 2.5" SATA Hard Drive - New Pull
Fujitsu raises the bar on mobile computing performance with the introduction of its first 7,200RPM, 2.5-inch hard disk drives using PMR technology. High-end notebook manufacturers have been experiencing demand for faster data access and higher disk drive capacities. The new Fujitsu 7,200RPM models satisfy both requirements, allowing manufacturers to offer true high performance mobile computing solutions.
Engineered to deliver high performance and high capacity in a small form factor, the mobile series retains the outstanding level of quality and reliability for which Fujitsu is renowned. These 7,200 RPM mobile HDDs deliver a low typical average read seek time of 10.5ms and a low average latency of 4.17ms. Featuring up to 160GB of storage space, low power consumption and acoustic noise, these 2.5-inch SATA hard disk drives are an excellent choice for today’s ultra-fast, high-capacity notebook computers.
Compatibility:
This drive is compatible with any laptop accepting 2.5" SATA hard drives.
Drive specification | MHW2080BJ |
Formatted Gbytes (512 bytes/sector) | 80 |
Bytes per sector | 512 |
Spindle speed (RPM) | 7,200 |
I/O data transfer rate (Gb/sec max) | 3.0 |
Cache buffer | 8 Mbytes |
Height (max) | 9.5 mm (0.37 inches) |
Width (max) | 70 mm (2.8 inches) |
Length (max) | 100 mm (3.9 inches) |
Weight (max) grams | 116 |
Track-to-track seek time (msec typical) | 1.5 |
Average seek, read (msec typical) | 10.5 |
Average seek, write (msec typical) | 12.5 |
Startup current (typical) 12V (peak) | 1.1 amps |
Operating power (typical) watts | 2.3 |
Idle mode (typical) watts | .8 |
Standby mode (typical) watts | .13 |
Sleep mode | .13 |
Ambient temperature | 5° to 55 °C (op.) –40° to 65 °C (nonop.) |
Click here to view the manufacturer's item description/brochure
Weight: 0.5 lb
Warranty: 1 Year DiscTech
New Pull
The product has been mounted in a brand new system (e.g. server), then removed from the system, before entering service. These products may have some hours of usage due to system build time / burn-in / testing etc. New Pulls are guaranteed to have at least 95% (often 99%) of their service life remaining , they may show signs of being physically mounted and dismounted. All handling is performed by trained technicians, taking full ESD precautions.
1 Year DiscTech Warranty
The product has a DiscTech warranty for the time period specified. View our limited warranty