Dell Powervault 220S SCSI Storage Array

Brand New
Low Stock:Call for ETA
3 Year ManufacturerWarranty

$3,999.00

Interface Types:	SCSI 80pin SCA-2 Hot-Swap
Form Factor:	3.5" LFF Hard Drive
Electrical Interface:	SCSI LVD U320 - 320MBps 16-bit
Bays/Ports/Slots:	14
Voltage:	110-240V Multi

Description

Dell Powervault 220S SCSI Storage Array - 14 Bays, Dual Fans, Dual Power Supplies, Dual U320 Controller Cards - Brand New

Dell PowerVault 220S systems are reliable, flexible, external SCSI expansion enclosures designed to support multiple Dell storage environments and RAID configurations. Each system offers maximized drive-spindle count, hot-plug hard drives, optional redundant power, redundant cooling, rackmount capability, systems management features, and a modular design for easy upgrades. Most major components, including hard drives and power supply/cooling modules are hot-pluggable and can be removed and replaced easily. The enclosure management module (EMM), split-bus module, and SCSI terminator card are "warm-pluggable." This means they can be removed or inserted while the power is on, but all I/O activity has ceased.

Uses Dell 9D988 trays / caddies.

Specifications

Drives
SCSI hard drives	support for up to fourteen 1-inch-by-3.5-inch LVD Ultra 160 and Ultra 320 hot-plug hard drives, at speeds of 10K or 15K rpm.
Bus
Configurations	support for any of the following: one 14-device SCSI bus (joined-bus mode) one clustered 13-device SCSI bus (cluster mode) two independent 7-device SCSI buses (split-bus mode)
Back-Panel Connectors
SCSI connector	68-pin shielded P-type SCSI for connection to host
Backplane Board Connectors
Hard drives	fourteen 80-pin SCA-2 connectors
Power supply/cooling module	2 high-current connectors
Enclosure management modules (EMM)	210-pin connector
Split-bus module	180-pin connector
Enclosure Modules
EMM	2 warm-pluggable modules
Split-bus module	1 warm-pluggable module with an external slide switch to change between split-bus, joined-bus, and cluster modes
SCSI terminator card	1 warm-pluggable module to the terminate SCSI bus in nonredundant EMM configurations
LED Indicators
Front panel	5 LED status indicators for power, fault, split bus, cluster mode, and over-temperature
Hard-drive carrier	1 single-color activity LED and 1 two-color LED status indicator per drive
EMM	3 LED status indicators for power, fault, and active status
Split-bus module	1 LED indicator for power
Power supply and cooling module	3 LED status indicators for power supply status, power supply fault, and AC status and 2 for cooling module fault
Power Supplies
Wattage	600 W
Heat dissipation	200 W
Voltage	100-240 V rated (actual 85-264 V)
Frequency	50-60 Hz
Amperage	9.4 A at 100 V, 4.6 A at 200 V
Physical
Height	13.26 cm (5.22 inches)
Width	44.58 cm (17.55 inches)
Depth	50.8 cm (20 inches)
Weight PowerVault 220S PowerVault 221S	32.4 kg (71.5 lb.) maximum redundant configuration with all hard drives installed 42.2 kg (93.0 lb.) maximum redundant configuration with all hard drives installed
Environmental
Temperature: Operating Storage	10° to 35°C (50° to 95°F) -40° to 65°C (-40° to 149°F)
Relative humidity Operating Storage	8% to 80% (noncondensing) 8% to 95% (noncondensing)
Altitude Operating	-16 to 3048 m (-50 to 10,000 ft)
BTU per hour	2750
Available Hard-Drive Power (Per Slot)
Supported hard-drive power consumption	up to 1.3 A at +12V up to 1.5 A at +5V

Click here to view the manufacturer's item description/brochure

Weight: 55 lb

Warranty: 3 Year Manufacturer

Condition

Brand New

Warranty

3 Year Manufacturer Warranty

4.7 Overall6966 Reviews